Are you struggling to find the best battery desulfator for your car? Lead-acid batteries are prone to capacity losses especially due to sulfation. How much time and money would you save if you could prevent battery failures by restoring lost battery capacity?
You’ve probably experienced several battery failures after leaving your lead-acid car battery uncharged for a long time. This is because the lead sulfur in the battery hardens over time creating small solid deposits that lower your battery’s capacity.
One of the best solutions for this is to use a battery desulfator. It helps to restore lost capacity in batteries and to reduce the chances of battery failure. If you’re looking to desulphurate your battery, this article gives you some of the important things to look at before picking the best battery desulfator.
XTREME CHARGE XC100-P – Charge 12V Battery Maintenance Charger Desulfator
Specs
The Xtreme Charge XC100-P Battery Charger & Desulfator evaluates and tests 12-Volt lead-acid batteries -VRLA, AGM or flooded. This battery charger makes maintenance and bulk charging simple with proprietary algorithms and microprocessor controlled technology that measures voltage and current to determine the proper operating charge. The variable float charge, of this battery charger, improves battery condition by increasing the charge rate safely to optimal levels and protecting it from being overcharged. Includes fuse-protected battery clamps
Battery Life Saver BLS-12/24BW 12 and 24 volt Battery System Desulfator Rejuvenator
Specs
75% to 80% of lead acid batteries fail prematurely because of formation of lead sulfate on the plates. These crystals cause batteries to become unusable at approximately one-third of their natural life. The Battery Life Saver electronic desulfator handles this problem. How does it Work?The Battery Life Saver sends a frequency signal to each crystal of lead sulfate, causing it to dissolve into lead and sulfuric acid. This restores the battery to its original condition and allows the electrical charge to be drawn from the battery. Benefits of Using The Battery Life SaverIt rejuvenates old batteries, maintains working batteries in optimal condition, and extends battery life, saving time and money. With the Battery Life Saver, more power is available from your batteries and you need less power to charge them. By reducing the number of batteries that get thrown away and put in landfills, the Battery Life Saver helps to protect the environment. This model is designed for 12 and 24 volt solar/wind battery banks. Similar to the BLS-12/24B, but the wires are 4′ in length to span 8′. Comes with alligator type battery clips for attachment New for 2012 – 5 year warranty! 120 day money back guarantee!
Pulsetech PowerPulse Battery Maintenance System
Specs
The QuadLink is compatible with most 6-volt or 12-volt battery maintenance charger up to 8 amps using the standard 2-prong output connector. The capabilities of your current charger are simply being passed through to the batteries via the QuadLink so the battery charger is always in full control of the charging process. In other words, the QuadLink is almost transparent to the battery.
Pulsetech PowerPulse Battery Maintenance System
Specs
The QuadLink is compatible with most 6-volt or 12-volt battery maintenance charger up to 8 amps using the standard 2-prong output connector. The capabilities of your current charger are simply being passed through to the batteries via the QuadLink so the battery charger is always in full control of the charging process. In other words, the QuadLink is almost transparent to the battery.
BatteryMinder 128CEC1: 12V 2/4/8 AMP Battery Charger – Maintainer – Desulfator
Specs
Features & Benefits:
BatteryMINDer Model 128CEC1: 12-Volt 2/4/8 AMP Charger-Maintainer-Desulfator
Lead Acid Batteries 12v 24v 36v 48v 60v 72v Battery Regenerator 400Ah Auto Pulse Desulfator
Specs
Wide Range 12V 24V 36V 48V 60V 72V Lead Acid Battery Desulfator Life Extender
SPECIFICATION
Working Amp :40mA max
Peak Amp :4A max
Peak Voltage :60-100V
Pulse Frequency :10,000HZ
Cutoff amp :5mA
Voltage:12V,24V,36V,48V,60V,72V combined,manuall setting
Remaks:LED light indicates when pulse working
PRODUCT OVERVIEW
Batteries often fail because “sulfates” slowly develop and cover the battery plates. This sulfating process also weakens the electrolyte and this combined with the gradual coating of the plates slowly and almost imperceptibly reduces the battery’s ability to receive, store and then deliver power. This sulfating process gradually impairs battery function and causes a capacity loss until the battery can no longer perform the desired task and so the battery is deemed to have “failed”.
FUNCTION
The High-frequency Peak Pulse delivers an electronically controlled pulse to the battery causing crystalline sulfates to dissolve back into the electrolyte and so restoring battery function and electrolyte strength regaining the batteries ability to receive charging currentand deliver discharge current.
ADVANCED TECHNOLOGY
Many desulfator products use an old technology inductor design to generate the pulse to desulfate a battery. This old technology creates a harsh inductor peak that can be damaging to the battery plates.
Utilising our new capacity pulsing method a “soft” peak is generated so dissolving sulfates without damaging the battery plates. Old technology also requires a large inductor so necessitating a physically large desulfator device whereas using our advanced technology design the Auto Pulse Desulfator device is very compact yet provides BIG performance.
Battery Desulfator Buying Guide
Sulfation in lead-acid batteries arises from old age and a lack of battery maintenance. It prevents batteries from holding their charge. Over time, your vehicle will not be able to perform critical functions due to frequent battery failures.
It’s essential for car owners to carry out regular battery maintenance over time to prevent sulfation. A battery desulfator helps to desulphurate a battery, hence helping to increase capacity and revive it if it was dead. This is achieved by sending high frequencies to the battery to eliminate sulfation crystals.
Below is a guide that will help you make an informed decision when buying the best battery desulfator:
Why a Battery Desulfator May Not Work
While it’s common for sulfation crystals to be behind your battery’s reduced capacity, it does not mean that they are the only reason behind the problem. Short or open cell and physical damage are also leading causes of battery failure. These two issues cannot be solved by using a battery desulfator.
Use a car battery tester to determine if there is physical damage on your battery. If there is, it may be best to buy a new battery rather than trying to fix it.
How Desulfators Work
A battery desulfator helps to remove sulfate crystals that have built up over time on the positive and negative plates of your battery. It sends frequencies of varying ranges to the plates that help to dissolve the crystals.
The result is a clean set of plates that can now function without hindrance. The lost battery capacity is also restored.
Desulfator Battery Charger
Battery desulfation functions differently. Some come as a complete system that includes a desulfator and a charger while others do not include a charger. For the latter, you will be required to connect desulfator to a charger or maintainer.
Conclusion
A lot of the batteries that are assumed to be dead could be restored using a battery desulfator. If you find yourself buying batteries often, it is a good option to buy yourself one. This helps to restore batteries that are dead as a result of sulfation. It also helps to save on time and money spent looking for new batteries.
Written by William Mutugi, an automotive expert.
Leave a Reply